- ± 50% Joint Width Movement
- Medium Modulus Building Sealant for Expansion Joints
- Structural and Non-Structural Glazing of Glass, Metals, and Plastics
Dow Corning® 795 is a one-part, medium modulus, neutral cure silicone formulation. Dow Corning® 795 cures to a durable and flexible silicone rubber building joint seal, and can accommodate ± 50% joint movement in a properly designed joint.
NOTE: Should not be applied to building materials that bleed oils, plasticizers or solvents, or in totally confined spaces. Do not apply to frost-laden or wet surfaces, or to surfaces that are in direct contact with food. Check cartridge label and Specification Data Sheet for additional limitations.
Basic Use: Structural and non-structural glazing of glass, metal, and plastic; adhering stiffeners to building panels; weatherproofing applications, including perimeter sealing of doors and windows. Dow Corning® 795 is virtually unaffected by sunlight, rain, sleet, snow, ultraviolet radiation, atmospheric contamination, ozone, and temperature extremes. Joint performance does not change significantly with aging or exposure to weather.
Comparable Sealants:CRL: 95C.
Dow Corning®: 995, 791.
GE®: SilPruf® 2000, UltraGlaze® SSG 4000.
Tremco®: Spectrem 2, Spectrem 3.
Pecora: 864, 895.
Sonneborn: OmniSeal.
Sika®: SikaSil®-WS95.
Limitations: Should not be applied to building materials that bleed oils, plasticizers or solvents, or in totally confined spaces. Do not apply to frost-laden or wet surfaces, or to surfaces that are in direct contact with food. Check cartridge label and Specification Data Sheet for additional limitations.
Technical Data: It meets or exceeds the following specification standards: Federal Specifications TT-S-001543A (COM-NBS) Class A for silicone building sealants, and TT-S-00230C (COM-NBS) Class A for one component building sealants; ASTM C-920 Type S, Grade NS, Class 50, Use NT, G, A and O; ASTM Specification C 1184 for structural silicone sealants; Canadian Specification CAN2-19.13-M82.
Product Warning:Dow Corning® 795 should not be applied to building materials that bleed oils, plasticizers or solvents, or in totally confined spaces. Do not apply to frost-laden or wet surfaces, or to surfaces that are in direct contact with food. Check cartridge label and Specification Data Sheet for additional limitations.
Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.
Installation Instructions
